Case 8000 Series - Configure Messages Menu

4.4.2 Configure Messages Menu (conf mess command)
Router : Watford CONFIGURE MESSAGES FORM Rel x.y
--------------------------------------------------------------------------------
WEL - Welcome Banner
COM - Connect Message
BUSY - Destination Busy
ICD - Incompatible Destination
DISC - Disconnect Message
User Prompt:
--------------------------------------------------------------------------------
PF2 - Help
--------------------------------------------------------------------------------
(conf mess) Enter message type:
This menu allows you to edit the welcome banner, and to configure general
messages.
The banner may contain embedded control characters in the standard way
(e.g.
^G = control-G).
By default the banner will be output with a terminating carriage return
(
^M) and line feed (^J). This can be suppressed by ending the text line with
a backslash \. (A backslash is output if the line is terminated by two
backslashes.)
The banner can be a maximum of 78 characters.
COM/BUSY/ICD/DISC (Free Format Text, 59)
These fields are optional. They may contain embedded control characters.
Entered text will be output in replacement for the standard text (COM,
DISC etc.).
PROMPT (Free Format Text, 59)
This field is optional. It may contain embedded control characters.
Entered text will be output in user dialogue as a prompt to enter the next
command.
X870-300351 Issue 1 4-12 Rev.0