4.5 Control Menu (cont command)
This menu allows you to control the X.25 and Ethernet interfaces, new
gateway calls and connections, and also allows you to access the Service
menu.
Router : Watford CONTROL MENU Rel x.y
--------------------------------------------------------------------------------
* LAN - further LAN calls (ENable/DIsable)
WAN - further WAN calls (ENable/DIsable)
SERV - Services
CLEAR - Clear Connections
TRACE - trace port (ENable/DIsable
* = Disabled
EN - Enable DI - Disable CL - Clear
--------------------------------------------------------------------------------
PF2 - Help PF4 - Main Menu
PF3 - Prev Menu
--------------------------------------------------------------------------------
(cont) Enter item or action:
You can either specify an action to be performed, followed by the item to be
affected, or specify the item first and then the action. Each action can only
be performed on certain items (displayed in brackets).
4.5.1 LAN (disable :
di lan command)
(enable :
en lan command)
Disabling Ethernet prevents any new gateway calls to or from the LAN
being established.
Enabling Ethernet allows new calls to be established.
4.5.2 WAN (disable :
di wan command)
(enable :
en wan command)
Disabling WAN prevents new gateway calls to or from X.25.
X870-300351 Issue 1 4-38 Rev.0
To Next Page
Loading...
