Enter rtr rc ed followed by the name of the remote Router (e.g. London) and
complete the form as follows:
Router : Birmingham CONFIGURE X25 ROUTER FORM REL x.y
-------------------------------------------------------------------------------
NAME : London Interface :
IP Address : 003.000.000.001
X.121 Called Adr : 1100047050
Password :
Maximum SVCs : 1
Inactivity timeout : 40
RIP updates : ENABLED
-------------------------------------------------------------------------------
PF2 - Help ^R - Restore
PF1 - Submit ^C - Abort
-------------------------------------------------------------------------------
Once these remote routers have been enabled, routing information will be
automatically exchanged between them – this can be verified by checking
the Routing Table screen.
Provided that any necessary configuring of gateways has already been
performed on the hosts, it should now be possible for file transfer to take
place.
X870-300351 Issue 1 E-14 Rev.0
To Next Page
Loading...
