Maximum SVCs (Free Format Text, 2)
This field specifies the maximum number of SVCs which will be allowed
between this and the remote Router.
Inactivity timeout (Free Format Text, 24)
This field specifies the length of time in seconds, after which if no packets
have been received or sent on a particular SVC, it will be disconnected.
(Note - Routing Information is advertised to each enabled remote router
every 30 seconds, so if this timeout is greater than 30, then at least one
SVC will remain permanently connected to the remote router.)
RIP updates (Constrained List)
RIP updates may be enabled/disabled on a per remote router basis. The
options may be selected using the space bar.
ENABLED – Send RIP updates to remote router.
DISABLED – Do not send RIP updates to remote router.
4.7.7 MAC, IP and ICMP Statistics (
rtr mac command)
This screen is identical to the Line Status/Statistics Menu as described in
Section 4.6.3.
X870-300351 Issue 1 4-62 Rev.0
To Next Page
Loading...
