Case 8000 Series - Configure Profiles Menu

Keepalive Time (Free Format Text,6)
This field specifies the number of seconds between each poll and has a
range of 30-999 seconds. The field defaults to 30 seconds.
X.121 Address (Free Format Text, 15)
This field represents the X.25 Address of this Router. From X.25, the user
should enter dialogue mode when selecting this address.
RSET From X.25 (Constrained List)
This field controls whether the remote X.25 device can issue a remote X.29
SET to Router.
Enabled– Accept remote X.29 SET command.
Disabled – Do not accept X.29 SET command.
4.4.4 Configure Profiles Menu (
conf prof command)
Router : Watford CONFIGURE PROFILES MENU Rel x.y
--------------------------------------------------------------------------------
USER - User Profiles
SERV - Service Profiles
TERM - Terminal Profiles
--------------------------------------------------------------------------------
PF2 - Help PF4 - Main Menu
PF3 - Prev Menu
--------------------------------------------------------------------------------
(conf prof) Enter profile type:
This menu allows you to choose menus for user profiles, service profiles and
terminal profiles.
X870-300351 Issue 1 4-15 Rev.0