4.9 Item Definitions
The following definitions describe parameters to various commands and
are used throughout this manual.
<Flag>
A flag is used to indicate a positive or negative response.
A positive response can be indicated in several ways:
TRUE
ON
ENABLE
YES
A negative response is indicated using the inverse of these:
FALSE
OFF
DISABLE
NO
<Internet Address>
An internet address represents a 32-bit device address within a
network, or network of networks. The standard representation is four
decimal numbers, with each number representing an individual octet,
each number being separated by a dot.
<Number>.<Number>.<Number>.<Number> (e.g. 1.2.3.4)
Each number can be in the range 0 to 255.
Note that a number can be entered in hex by preceding the hex number
by
0x, e.g.
0x01.0x02.0xfd.0xa9 is equivalent to 1.2.253.169
<Key Def>
A key definition contains a string part (the key sequence) and a text part
(the help text).
<String> <Text> e.g. ''^[OP'' ''PF1''
X870-300351 Issue 1 4-67 Rev.0
To Next Page
Loading...
