Case 8000 Series - Configure X.25 Router Form

4.7.6 Configure X.25 Router Form (rtr rc ed command)
Router : Watford CONFIGURE X25 ROUTER FORM Rel x.y
--------------------------------------------------------------------------------
Name : Interface :
IP Address :
X.121 Called Adr :
Password :
Maximum SVCs :
Inactivity timeout :
RIP updates :
--------------------------------------------------------------------------------
PF2 - Help ^R - Restore
PF1 - Submit ^C - Abort
--------------------------------------------------------------------------------
Name (Free Format Text, 15)
This is a mandatory field that is used to input the identity of the remote
router.
Interface (Information)
This field displays the interface number of the remote router and
corresponds to the interface number on the other Router screens.
IP Address (Free Format Text, 20)
This is a mandatory field. It should contain the IP address of the X.25
interface of the remote router.
X.121 Called Adr (Free Format Text, 15)
This is a mandatory field. It contains the X.121 address of the remote
router.
Password (Free Format Blind Text, 11)
This is an optional field. It will be used whenever a connection attempt is
made to the remote router.
X870-300351 Issue 1 4-61 Rev.0