4.4.4.2 Configure User Profile Form (conf up ed command)
Router : Watford CONFIGURE USER PROFILE FORM Rel x.y
--------------------------------------------------------------------------------
Name : Number : 1
Escape seq : Txt :
Disc. seq : Txt :
Switch seq1 : Txt :
Switch seq2 : Txt :
Switch seq3 : Txt :
Switch seq4 : Txt :
Directory banner : ENABLE Manager Login : ENABLE
Free Service selection : ENABLE Session Quota : 4
Inactivity disc. time : Parity : EVEN
Go-Ahead : NOT SUPPRESSED Binary : ENABLED
CR map : CR Break Map : DISABLED
--------------------------------------------------------------------------------
PF2 - Help ^R - Restore
PF1 - Submit ^c - Abort
--------------------------------------------------------------------------------
This form allows you to specify a set of characteristics to be adopted by a
user of Router (the user is the originator of a call to Router: this can be a
terminal or a host).
Name (Free Format Text, 15)
This field is optional. It can contain an alphanumeric name unique to this
user profile.
Number (Information)
This displays the current profile number.
Escape Seq (Free Format Text, 20)
This field is optional. The string must begin with a control character (a
carat) and may contain embedded control characters. It is used to define
the key sequence required to indicate an escape to dialogue.
Disc. Seq (Free Format Text, 20)
This field is optional. The string must begin with a control character (a
carat) and may contain embedded control characters. It is used to define
the key sequence required to indicate disconnect from service (session).
X870-300351 Issue 1 4-17 Rev.0
To Next Page
Loading...
