CursorUp (Free Format Text, 15)
This field defines the character sequence generated from the terminal to
indicate a move-cursor-up.
CursorDown (Free Format Text, 15)
This field defines the character sequence generated from the terminal to
indicate a move-cursor-down.
Redisplay (Free Format Text, 15)
^V can be generated from the terminal to indicate that a redisplay of the
entire screen is required. This field allows an additional key sequence to be
defined, if required.
Next Page (Free Format Text, 15)
^N or ^F can be generated from the terminal to indicate that a move to the
next page is required. This field allows an additional key sequence to be
defined, if required.
Previous Page (Free Format Text, 15)
^B can be generated from the terminal to indicate that a move to the
previous page is required. This field allows an additional key sequence to
be defined, if required.
Help (Free Format Text, 15)
^W can be generated from the terminal to indicate that help is required.
This field allows an additional key sequence to be defined, if required.
Clear (Free Format Text, 15)
^X or ^U can be generated from the terminal to indicate that a clear
line/field operation is required. This field allows an additional key
sequence to be defined, if required.
Restore (Free Format Text, 15)
^R can be generated from the terminal to indicate that a restore line/field is
required. This field allows an additional key sequence to be defined, if
required.
Main Menu (Free Format Text, 15)
^G can be generated from the terminal to indicate that a move to the Main
Menu is required. This field allows an additional key sequence to be
defined, if required.
X870-300351 Issue 1 4-26 Rev.0
To Next Page
