4.5.3.2 Control LAN Services Menu (cont serv lan or cont lan command)
Router : Watford CONTROL LAN SERVICES MENU Rel x.y
--------------------------------------------------------------------------------
Name Name Name
*<ServiceName> *<ServiceName> *<ServiceName>
*<ServiceName> *<ServiceName> *<ServiceName>
*<ServiceName> *<ServiceName> *<ServiceName>
*<ServiceName> *<ServiceName> *<ServiceName>
*<ServiceName> *<ServiceName> *<ServiceName>
*<ServiceName> *<ServiceName> *<ServiceName>
*<ServiceName> *<ServiceName> *<ServiceName>
*<ServiceName> *<ServiceName> *<ServiceName>
*<ServiceName> *<ServiceName> *<ServiceName>
* = Service Disabled
EN - Enable DI - Disable
--------------------------------------------------------------------------------
PF2 - Help ^B - Prev Page PF4 - Main Menu
^F - Next Page PF3 - Prev Menu
--------------------------------------------------------------------------------
(cont lan) Enter action :
This menu displays up to a page of configured LAN services. An asterisk is
displayed by the name to indicate that the service is disabled. You can
enable or disable LAN services. When a service is disabled then no calls
can be made to it and it will not be displayed when you execute the
DIRECTORY command (see Section 5.2.8). The enable and disable actions
require a service to be specified. Existing connections are not broken.
(Connections can be broken using the clear command (
cl); see Section
4.5.5.)
X870-300351 Issue 1 4-41 Rev.0
To Next Page
Loading...
