EasyManua.ls Logo

Case 8000 Series - Page 79

Case 8000 Series
162 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
TELNET:Tx Data Chr
This is the number of data characters that have been transmitted to the
LAN from this TELNET connection.
TELNET:Rx Data Chr
This is the number of data characters that have been received from the
LAN to this TELNET connection.
TELNET:Tx Non-Data
This is the number of non-data (special TELNET) characters that have
been transmitted to the LAN from this TELNET connection.
TELNET:Rx Non-Data
This is the number of non-data (special TELNET) characters that have
been received from the LAN to this TELNET connection.
TCP: Local IP address
This is the local IP address.
TCP: Rem IP address
This is the remote IP address.
TCP: Local port
This is the TCP port allocated locally, e.g. if this is an incoming standard
TELNET connection, then it will probably be 23.
TCP: Rem port
This is the TCP port allocated remotely, e.g. if this is an outgoing standard
TELNET connection, then it will probably be 23.
TCP: Tx/Rx Packets
The number of packets transmitted/received on this TCP connection.
TCP:Re-Transmit
The number of times TCP had to retransmit a packet for this connection.
TCP:Checksum errs
The total number of TCP packets received with errors, for all connections.
TCP: RTT
The current value of the 'round trip time', in tenths of a second. This is the
time between sending a packet, and receiving and processing the
acknowledgement for it.
X870-300351 Issue 1 4-47 Rev.0

Table of Contents

Related product manuals