CHAPTER 6 – LUBRICATION / FILTERS / FLUIDS
6-35
Each 500 hours
WARNING: Never use gasoline, solvent or
other ammable uids to clean parts. Use au-
thorized commercial, nonammable, nontoxic
solvents.
Clean lter and surrounding area. Then remove the lter
housing, change the elements and gaskets. Clean the
inside of the lter housing and contact surface. Install
the new lter.
Lubricate the lter seal with a thin coat of clean uid and
tighten the new lter until it contacts with the sealing sur-
face. Tighten the lter 1/3 to 1/2 a turn more.
ATTENTION: Dispose used lters in speciali-
zed recycling stations.
ZF TRANSMISSION FLUID FILTER
(845B / 865B / 885B WITH ZF TRANSMISSION)
FUNK TRANSMISSION FLUID FILTER
(845B / 865B / 885B WITH FUNK TRANSMISSION)
Transmission Fluid Filter Change
To Next Page
Loading...
