'")
To Clean the Battery
Check each battery regularly for dirt, corrosion and damage. Dirt, mixed
with electrolyte or moisture on the top of the battery, can cause a discharged
condition in the battery. Use one of the following methods to clean the battery.
1. Use Case Battery Saver, part number M20376. Follow the instructions on
the container. This cleaner does not need water.
2. Use baking soda or ammonia and flush the battery with clear water. If you
do not have Case Battery Saver, use other special cleaners to prevent
corrosion on the battery terminals.
A
WARNING:
When the battery electrolyte is frozen, the battery can
explode if,
(1)
you try to charge the battery,
or
(2)
you try to jump start
and run the engine. To prevent the battery electrolyte from freezing,
try to keep the battery at full charge. If you do not follow these
instructions, you or others in the area can be injured. 48-35
103
To Next Page
Loading...
