FUEL, FLUIDS AND LUBRICANTS
COMPONENT
CAPACITY
SPECIFICATIONS
U.S.
Metric
Fuel tank
38 gals.
1441itres
See page 68.
Cooling system
28 qts.
27 litres
A mixture of 50% ethylene glycol and
50% water must be used for tempera-
tures above -34° F (-3]0 C). If it is pos-
sible that the temperature will be lower,
adjust the mixture.
Engine crankcase:
Engine oil: Case HOM Oil
Without filter change
10 qts.
9.4 litres
CD - Commercial class
0
With filter change
11 qts.
10.4 lit res
Above 32° F (0°C) - SAE 30
10° to 50°F (-12° to 10°C) - SAE 20W20
Below 32° F (0° C) - SAE 10W
Brake master cylinders
As required
SAE J1703c (DOT 3) brake fluid
Hydraulic system:
System total
21 gals.
80litres
Case TCH Fluid
Reservoir refill
16 gals.
61 litres
Alternate oil:
Automatic transmission fluid (ATF)
such as Oexron II.
Axles:
Case FOL Fluid
Each center bowl
9-1/2 qts.
91itres
(SAE 85W - 140
Each wheel end
3 pts. 1.4 litres
API-GL-5 Gear Lube)
Grease fittings
As required
No.2 moly-disulfide grease.
Alcohol evaporator
1 pt.
0.5litres
Clean wood alcohol.
Transmission-
converter:
Case TCH Fluid.
System total
9 gals. 34 litres
Alternate oils:
Transmission refill 7~1/2gals.
28 litres
Type C-2 transmission
hydraulic fluid such as
Tenneco Hytrans Fluid.
69
To Next Page
Loading...
