ENGINE OPERATION
First Period of Operation with a New Engine
During the first period of operation of a new engine you must do the
following:
1. LOAD - For the first 8 hours, operate with a normal load. Do not permit a
transmission or hydraulic stall longer than 10 seconds.
2. ENGINE SPEED - During the first period of operation, operate the engine
at maximum speed when safe.
3. OPERATING TEMPERATURE - Keep the operating temperature of the
engineat the normal level. Low operati ng temperatu recan cause acids and
deposits in the engine.
4. ENGINE OIL - Change the engine oil and oil filter after the first 20 hours of
engine operation.
5. COOLING SYSTEM - If the machine has been operating with a load, run
the engine at idle speed for several minutes before you stop the engine.
This permits the engine parts to become cool evenly.
Before starting the engine for the first time and before each operating
period, carefully follow the information in this manual.
50
To Next Page
Loading...
