Service and Checks Before You Start
Check the machine before starting the day's work or before each shift
change. Seethe following illustration and do the recommended checks before
starting the engine.
SAFETY DECALS: You must clean or 9. EN GIN E COM PARTM ENT:
replace all safety or instruction de- Check for oil and fuel leaks.
cals that you cannot read. See page 10. COVERS AND GUARDS: Check
76. for damaged or missing parts.
11. REAR LIGHTS: Check for dam-
1. FRONT LIGHTS: Check for dam-
age.
2. BUCKET LINKAGE: Check for
damage and grease all loader pi-
vot points.
3. BUCKET: Check for damage.
4. FRONT AXLE: Check for leaks.
5. PIVOT AREA: Check for trash
and leaks.
6. AIR RESERVOIR: Drain water.
7. TIRES: Check air pressure.
Check for cuts and gouges.
8. REAR AXLE: Check for leaks and
grease rear axle trunnions.
age.
12. COOLING SYSTEM: Check for
leaks and trash on radiator.
Check for correct coolant level.
13. ENGINE OIL: Check oil level.
14. AIR CLEANER SERVICE INDI-
CATOR: Check condition of air
cleaner elements.
15. TRANSMISSION: Check for
leaks.
16. OPERATOR'S AREA: Clean.
17. INSTRUMENT PANEL: Check
for damage.
NOTE: The checks above include all items in the 10 Hour Interval of the
Maintenance Chart. See page 72. For more information, see the Maintenance
and Lubrication section of this manual.
51
-_._-----
To Next Page
Loading...
