MAINTENANCE AND LUBRICATION
INTRODUCTION
Scheduled maintenance and lubrication are the normal operations re-
quired to provide safe and efficient operation. Follow the maintenance chart
carefully to insure that all points have been serviced properly and on time.
Hourly intervals have been established for servicing your machine. They
are based on the number of hours the engine has run. The hourmeter, which
operates whenever the engine is running, indicates the accumulated hours of
operation.
A service manual is available for this machine at a nominal fee. Contact
your Case dealer for further information.
FIRST PERIOD OF OPERATION
The items listed in the first period of operation section are performed
during the first period of operation only.
SCHEDULED MAINTENANCE
The items listed under Maintenance Chart for Regular Intervals are sepa-
rated into maximum hourly intervals. These intervals are based on "average"
operating conditions. When operating under "severe" conditions, such as
excessive heat, cold, dust, mud or water, shorten the intervals.
The chart on the following two pages lists all components to be serviced,
the interval of servicing and the page on which each is found.
70
To Next Page
Loading...
