Procedure to Add Air to the Tires
This procedure is only for adding airto the tire. When you must disassem-
ble the wheel, refer to the following topic.
When you add air to the tires, use a hose that has a self-locking nozzle.
Attach the self-locking nozzle to the tire stem and start the flow of air. Always
stand behind the tread of the tire when you add air. Seethe photographs above.
Stop the flow of air to the tire and disconnect the air hose nozzle from the
tire. Check the tire air pressure.
Procedure to Service the Tires
(Tires With Split Rim Wheels)
Always have a qualified tire mechanic service the split rim type wheels on
your machine. A tire inflation cage and other correct tire repair equipment is
required. Using the wrong service procedure with this type of wheel can be
dangerous.
),
-
132
To Next Page
Loading...
