EasyManua.ls Logo

Case W14 - Page 142

Case W14
143 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
AFTER DELIVERY CHECK
(After First 20 Hours of Operation of New Machine)
Date of Check _
Hourmeter reading:
hours
MACHINE: Model W14 Product Identification Number
OWNER: Name
Address
DEALER: Name
Address
COOLING SYSTEM
D Check radiator coolant level.
D
Check for leaks.
FUEL SYSTEM
D Check for leaks.
ELECTRICAL SYSTEM
D Check battery fluid level and specific gravity.
D
Check operation of starter, alternator, instruments.
LUBRICATION
D
Grease all pressure fittings.
D
Change engine oil.
D
Change engine oil filter.
D
Check differential and planetary oil level.
D
Check transmission oil level.
ENGINE
D
Tighten cylinder head bolts.
D
Check valves tappet clearance.
D
Check no load full goverened speed and idle
speed.
D
Check engine timing.
HYDRAULIC SYSTEM
D
Check reservoir oil level and air pressure.
D
Check main relief valve pressure on loader.
D
Check steering operation.
D
Change the hydraulic oil filter.
GENERAL
D
Check foot and parking brake adjustment.
D Service the air cleaner.
D
Inspect for oil leaks.
D
Tighten all accessible bolts.
D
Clean all breathers.
D
Check RaPS Cab environmental controls for
proper operation.
D
Check the tension of all drive belts.
SAFETY
D
Inspect the RaPS.
D
Check the safety decals and replace if necessary.
D
Check safety components (seat belt, lights, etc.)
D Make sure the machine has the W14 Operator's
Manual in the Manual Storage Box.
DEALER: Learn whether the owner or operator has any problems with the
machine. Make sure the owner or operator understands all the information in
this manual. Give the owner or operator information he needs.
After Delivery Check done by
Name of Dealer (signature)
Dealer Copy
Name of Owner (signature)
141

Table of Contents

Related product manuals