Pre-Starting
SAFETY RUL..ES
I' ,
I
I
~J
IMPORTANT:
Always install new decals if the old decals cannot be read.
When parts that have decals are replaced, make sure to install new decals with
the new part. You can get new decals from your Case dealer. 46-48-A
WARNING:
Before each period of operation, check the machine for
correct function of the steering controls, brake controls, hydraulic
h
controls, instruments, and safety equipment. Check the Neutral posi-
.. tion of the transmission control levers.
A
machine that runs correctly
can prevent accidents. Make all necessary repairs or adjustments
before you operate the machine. 26-4-C
WARNING:
You can have an accident if a part or a system on the
machine does not operate correctly. Before you operate the ma-
chine, make sure that you check all oil and fluid levels according to
the maintenance chart in this manual. Tighten all caps, dipsticks and
plugs. Check for oil or fluid leaks. Replace or adjust all parts that do
not operate correctly.
25-10-8
5
To Next Page
Loading...
