Safety Decals on the Machine
Make sure that you can read all safety decals and all instruction decals.
Check these decals every 10 hours of operation. Clean these decals if you
cannot read the words.
When you clean the decals, use only a cloth, water and soap. Do not use
solvent, gasoline, etc.
You must replace a decal if (1) the decal is damaged, (2) the decal is
missing or (3) the decal cannot be read.
If a decal is on a part that is replaced, make sure you install a new decal on
the new part. See your Case dealer for new decals.
Do Not Operate Tag
When you service, put a Do Not Operate tag on the instrument panel. A Do
Not Operate tag, Case Part Number 321-4614, is included with each new
machine. You can get extra tags from your Case dealer.
61
I
See Other Side
Reason _
J
I Case
76
To Next Page
Loading...
