142
Other Playback Functions (PLAY MENU)
. Creating a Collage of a Day’s Snapshots (Highlight Photo)
You can configure camera settings to automatically select
snapshot highlights and generate a collage of them. The
snapshots included in a Highlight Photo are selected
automatically based on their high light scores and shooting
condition information recorded along with the snapshots.
• You can use the Highlight Score function (page 143) to
change the highlight score of a snapshot.
1. Use [8] and [2] to select the recording date of the snapshots you
want to use and then press [SET].
2. Use [4] and [6] to select the layout you want and then press [SET].
This creates and stores the Highlight Photo.
3. Use [8] and [2] to select “Complete” and then press [SET].
• If you want the camera to randomly select different images from among those
on the selected recording date, use [8] and [2] to select “Shuffle”, and then
press [SET]. This will also delete the previously created Highlight Photo.
• An image whose highlight score is “0” is never included in a Highlight Photo.
• When there are more than 9,999 snapshots shot on the same date stored on the
memory card, Highlight Photo will select photos from those numbered 1 to 9999.
• The Highlight Photo operation may not be possible while battery power is low.
• Highlight Photo automatically selects snapshots to be included in the Highlight
Photo. You cannot specify the snapshots to be used.
• The types of images below cannot be included in a Highlight Photo.
Panorama image, Movies
• Highlight Photo may not work if there is a snapshot in camera memory that cannot
be displayed by the camera. In this case, the error message “There are not enough
images for this operation.” will appear.
Menu item: Highlight Functions * Highlight Photo
To Next Page
Loading...
Need help?
General
