15System Installation
8.4. Select “OK” to empty the syringe to waste.
NOTE
In order for the system to empty the syringe, the waste bottle and sensor must be connected.
8.5. System recovery is complete; select “OK.”
9. Once “EDGE Setup” is complete and the autosampler is home, insert the rack.
9.1. From the right side of the EDGE, slide the rack into place. The rack is in the proper positions once the
magnets hold it securely in place.
10. Customize System settings.
10.1. Select the System Menu icon in the bottom right corner of the screen.
10.2. Select Settings.
10.3. Select the Localization tab.
To Next Page
Loading...
Need help?
General
