24 Sample Analysis
CAUTION
The software will continue running methods in the queue for the second rack once “OK” is selected, even
if the second rack was not inserted.
Sample Removal and Cleanup
1. Remove the rack.
WARNING
The Q-Cup(s) may still be hot to touch.
2. Remove collection container from rack. Collected extracts are cooled, ltered, and ready for analysis.
3. Remove Q-Cup from rack and discard Q-Disc and sample.
4. Clean Q-Cups with organic solvent. Optional cleaning procedures are outlined below using LUMINOX or pH-neu-
tral and aluminum-safe cleaner.
• Hand wash with warm soapy water
• Sonicator
• Automated dishwasher
To Next Page
Loading...
