EasyManua.ls Logo

Cessna 182 - Abbreviations and Acronyms

Cessna 182
160 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
xiv
ABBREVIATIONS AND ACRONYMS
Terminology
Details
AOI
Aircraft Operating Instructions The CF approved manual governing operation
of the aircraft
Basic Empty
Weight
Empty weight of the aircraft, including un-useable fuel and any standard
equipment
BHP
Brake Horsepower the total power developed by the engine
CAS
Calibrated Airspeed IAS corrected for position and instrument error
CG
Centre of Gravity the balance point of the aircraft
CHT
Cylinder Head Temperature the measured temperature of an individual
cylinder head
DA
Density Altitude altitude corrected for pressure and temperature variations
Demonstrated
Crosswind
Maximum crosswind for which adequate control on takeoff and landing was
demonstrated during certification tests
EGT
Exhaust Gas Temperature the measured temperature of the exhaust gas,
normally at the cylinder exhaust manifold
FACU
Fuel-Air Control Unit
GPH
Gallons Per Hour fuel consumption rate
Gross Weight
The loaded weight of the aircraft
ICO
Idle Cut-Off the mixture setting at which combustion at idle power is no
longer sustainable
IAS
Indicated Airspeed airspeed as displayed on the airspeed indicator
ISA
International Standard Atmosphere SL conditions 15 deg C, alt setting 29.92
in-Hg, standard lapse rates
KCAS
Knots Calibrated Airspeed
KIAS
Knots Indicated Airspeed
KTAS
Knots True Airspeed

Table of Contents

Other manuals for Cessna 182

Related product manuals