2-7
generators, fresh air
vents
five VGs are missing in total
from all surfaces.
40. Fuel vent, pitot tube,
Condition and unobstructed
Figure 2-2 External Inspection
BETWEEN FLIGHT INSPECTION (BFI)
7. When conducting multiple flights, or when conducting a pilot change during flight
operations, the pilot shall conduct a Between Flight Inspection as follows:
Between Flight Inspection (BFI)
If checking engine oil shortly
after (within 1 hr) shutdown,
oil level may appear low as oil
has not fully drained into the
sump. Do not over-fill.
Check Qty, Cap Secure,
Doors Secure
Check Qty, Caps Secure and
In-Line
Figure 2-3 Between Flight Inspection
8. After entering the cockpit, proceed as follows:
Hold door closed – do not
slam. Ensure handle rotates
90º fwd.
Ensure seat rail locking pins
engaged.