CG VSR239p5 - Chapter 1 Safety Precautions; Safety Considerations

Emotron VS Series Quick Start Guide
- 4 -
!
Chapter 1 Safety Precautions
Safety Precautions
Safety signs in this manual and in the main Instruction manual:
NOTE ! Additional information as an aid to avoid problems.
CAUTION!
Indicates the situation in which the failure to follow operating
requirements may cause moderate or slight injury and damage
to equipment
Warning!
Failure to follow these instructions can result in serious injury to
the user in addition to serious damage to the AC drive.
Users are requested to read this chapter carefully when installing, commissioning and repairing
this product and perform the operation according to safety precautions as set forth in this chapter
without fail. CG will bear no responsibility for any injury and loss as a result of any violation operation.
1.1 Safety Considerations
The use phase
Safety
class
Considerations
Before
Installation
Danger
◆Do not install the product if the package is with water, or
component is missing or broken.
◆Do not install the product if the label on the package is not
identical to that on the inverter.
Caution
◆Be careful of carrying or transportation. Risk of devices
damage.
◆Do not use damaged product or the inverters missing
component .Risk of injury.
◆Do not touch the parts of control system with bare hands. Risk
of ESD hazard.
Installation
Danger
◆Installation base shall be metal or other non-flammable
material. Risk of fire.
◆Do not install inverter in an environment containing explosive
gases, otherwise there is danger of explosion.
◆Do not unscrew the fixing bolts, especially the bolts with red
mark.
Caution
◆Do not leave cable strips or screws in the inverter. Risk of
inverter damage.
◆Install the product at the place with less vibration and no direct
sunlight.
◆Consider the installation space for cooling purpose when two
or more inverters are placed in the same cabinet.