Chattanooga Intelect Focus Shockwave - Treatment; Safety information; Switching off the device

13 610 02 1018
55
Operation
5.17 Treatment
Safety information
Before using the device, the user must make sure it is functioning safely and in proper
condition.
• Each time after the device has been transported, make sure that all functional
checks have been performed on the device before you start treatment. Read about
this in chapter 5.15 functiOnal checks.
• Read chapter 1 general safety infOrMatiOn before beginning treatment.
CAUTION!
Handpiece not positioned correctly.
Impairment to health due to ineffective treatment!
• Dene the treatment zone and make sure that the handpiece
position always corresponds to the treatment zone.
• Make sure that the treatment is only administered by users who
meet the conditions in chapter 2.2 precOnditiOns fOr OperatiOn.
• For safety reasons, using the device for applications other than those specied in
chapter 2.1.1 indicatiOns is not permitted!
All status and error messages signaled during treatment must always be attended to
without delay!
CAUTION!
Injuries to patients and therapists
• No cleaning and maintenance work is to be carried out while the
device is being used on the patient.
• Apply a sufcient amount of coupling gel to the patient’s skin in the treatment
area and to the F-SW coupling diaphragm or the coupling cushion.
5.18 Switching off the device
• Switch off the Chattanooga Intelect F-SW using the main switch.