13 610 02 1018
56
Cleaning, Maintenance and Overhaul
6 Cleaning, Maintenance and Overhaul
CAUTION!
Injuries to patients and therapists
• No cleaning and maintenance work is to be carried out while the
device is being used on the patient.
6.1 Cleaning the device
Regular cleaning of the system ensures perfect hygiene and operation of the
Chattanooga Intelect F-SW.
CAUTION!
Electrical hazard!
Disconnect the device and the accessories from the mains before
starting any cleaning and overhauling work!
• Unplug the mains plug !
Overall external cleaning depends on the frequency of use and application of the
device.
All parts which come into contact with the patient must be cleaned after each
treatment.
• Wipe down the device parts with a damp cloth.
• For cleaning, use a lukewarm, dilute solution of non-vegetable soapy water.
ATTENTION
It is essential that no uid be permitted to penetrate either the device or its
tubing.
Ventilation slits
• Keep the ventilation slits clear.
Monitor and Touchscreen
To clean the LC display only a tissue dampened with water but without any cleaning
additives may be used.
• Wipe the display.
• Dry the screen with a cotton tissue.
• Remove contamination (eg. contrast media spots) immediately.
To Next Page
Loading...
