3-24 Christie ACT User Manual
020-100129-05 Rev. 1 (02-2010)
Section 3: Operation
Table 3.11 Editor: My Device Selections (Factory Defaults)
WHILE
1. Select the WHILE option to open the WHILE Condition
window. This can be any variable.
2. Type the first action for the WHILE condition.
3. Select the appropriate symbol (== or !=)
4. Type the second action. This can be any variable.
5. Click OK to add action to Christie ACT.
6. To add loop actions, from the Device Types window, highlight
the true option and click Add Action. These actions will
execute repeatedly as long as the While condition is true.
CALL
1. Select CALL to open the Call window.
2. Click the Subroutine button to display a list of subroutines.
3. Select an action or cue from the drop-down list that appears.
4. Click OK to select the routine.
5. Click OK a second time to add the selection to Christie ACT.
ACT Buttons (Button definitions [Sample1])
ACT Buzzer (Base Library Status Buzzer [Christie])
ACT Front Panel (Base Library Status LEDs [Christie])
Audio (Processor Dolby CP650)
Cues (Cue Library Serial [Christie])
Projector (DLP2K Christie CP2000)
Relays 1 Amp (Base Library R1 - R12 [Christie])
Relays 8 Amp (Base Library R13 - R14 [Christie])
Server (D-cinema player DoReMi DCP2000 (Ethernet API))
Show Control (Cue Definitions [Sample1])
Adding Actions
To Next Page
Loading...