CIGWELD WeldSkill 4R Wirefeeder - 1.03 Declaration of Conformity

SAFETY INSTRUCTIONS AND WARNINGS WELDSKILL 250, 350
Manual 0-5186 1-5 Safety Instructions and Warnings
1.03 Declaration of Conformity
Manufacturer: CIGWELD
Address: 71 Gower St, Preston
Victoria 3072
Australia
Description of equipment: Welding Equipment (GMAW). WeldSkill 250, 350 MIG Power Source, Wirefeeder and associated accessories.
Serial numbers are unique with each individual piece of equipment and details description, parts used to manufacture a unit and date of
manufacture.
The equipment conforms to all applicable aspects and regulations of the ‘Low Voltage Directive’ (Directive 73/23/EU, as recently changed
in Directive 93/68/EU and to the National legislation for the enforcement of the Directive.
National Standard and Technical Specifications
The product is designed and manufactured to a number of standards and technical requirements among them are:
• IEC60974-10applicabletoIndustrialEquipment-genericemissionsandregulations.
• AS1674Safetyinweldingandalliedprocesses.
• AS60974.1/IEC60974-1applicabletoweldingequipmentandassociatedaccessories.
Extensive product design verification is conducted at the manufacturing facility as part of the routine design and manufacturing process,
to ensure the product is safe and performs as specified. Rigorous testing is incorporated into the manufacturing process to ensure the
manufactured product meets or exceeds all design specifications.
CIGWELD has been manufacturing and merchandising an extensive equipment range with superior performance, ultra safe operation and
world class quality for more than 30 years and will continue to achieve excellence.