CIGWELD WeldSkill 4R Wirefeeder - SECTION 10: OPTIONS AND ACCESSORIES; 10.01 Options and Accessories

OpTIONS AND ACCESSORIES WELDSKILL 250, 350
Manual 0-5186 10-1 Options and Accessories
SECTION 10:
OPTIONS AND ACCESSORIES
10.01 Options and Accessories
Part Number Description
7977729 Feed Roll 0.6/0.8mm V Groove - hard wire
7977703 Feed Roll 0.9/1.2mm V Groove - hard wire
7977346 Feed Roll 1.2/1.6mm V Groove - hard wire
7977733 Feed Roll 0.8/ 0.9mm U Groove - soft wire
7977730 Feed Roll 1.0/1.2mm U Groove - soft wire
7977348 Feed Roll 1.2/1.6mm U Groove - soft wire
7977734 Feed Roll 0.8/0.9mm V Knurled - flux cored
7977347 Feed Roll 1.2/1.6mm V Knurled - flux cored
FAB250X12 MIG Torch 250A Euro (South Pacific Only)
FAB400X12 MIG Torch 400A Euro (South Pacific Only)
210254 WeldSkill Regulator/Flowmeter (South Pacific Only)
Table 10-1 Optional Accessories for WeldSkill 250, 350 MIGs and 4R Wirefeeder