3-2012
Plus 42 - 45 - 50 - 55
7
3 GENERAL INFORMATION 3
3.1 - MACHINE IDENTIFICATION
3.2 - TECHNICAL ASSISTANCE
C.I.M.A. S.p.A. is at the complete disposal of customers for any type of intervention. The names and
addresses of its service network, both in Italy and in foreign countries, can be requested from:
C.I.M.A. S.p.A. - 27040 Montù Beccaria - Loc. Molino Quaroni (PV) - ITALIA
tel. +39-0385-246636 - fax +39-0385-246637
e.mail service@cima.it
3.3 - SAFETY NOTICES
3.3.1 - General
The personnel appointed to the use of the machine must have acquired an
exhaustive knowledge of the same one and of the dispositions contained inside
this publication, be able to properly interpret the symbols of the adhesives applied
on the machine, and, in addition, perfectly know the safety and the work hygienic
rules in force in the country where the machine itself is to be used.
All the preparation, use, maintenance, moving and transporting operations must be carried out of the
regulations contained in this publication.
IT IS FORBIDDEN TO UTILISE THE SPRAYER FOR PURPOSES OTHER THAN FOR ITS
INTENDED USE, SINCE IT WAS MANUFACTURED ONLY FOR SPRAYING AGRICULTURAL
CROPS WITH ANTI-PARASITIC PRODUCTS.
Use the sprayer is allowed only during daylight: YOU MAY NOT USE IN NIGHTWORK.
ANY USE OTHER THAN THOSE DESCRIBED IN THE USE PERMITTED IS CONSIDERED AS
NOT CONFORMING AND THEREFORE IS NOT PERMITTED.
00128
00070
Identification nameplate
To Next Page
Loading...
