Cimbali M26 - Page 74

1 2
1 2
English
28 EN
BODYWORK - This operation must be carried out at the end of each working day
Use a soft cloth and cleaning products WITHOUT ammonia
or abrasives, removing any organic residue present in the
work area.
Note: Do not spray liquids into the panel slots.
DRAINING TRAY
- This operation must be carried out every 7 days
1. After removing the basin, remove the lid of the draining
tray.
2. Remove any residue with a sponge and rinse well with
cold water.
- This operation must be carried out at the end of each
working day
Pour about a litre of hot water into the draining tray to
remove any discharge residues.
127(WKHSURFHGXUHVGHVFULEHGEHORZFDQDOVREHFDUULHGRXWZKHQWKHPDFKLQHLVVZLWFKHGRႇ
GRILLE AND DRIP BASIN - This operation must be carried out at the end of each working day
1. Remove the grille from the basin.
2. Extract the basin.
3. Rinse the grille and tray under running water.
Danger of burns
DO NOT insert your hands beneath
the front panel.
HOT-WATER NOZZLE - This operation must be carried out at the end of each working day
Using a clean sponge, wash with hot water removing any
organic residue present. Rinse carefully.
DO NOT use abrasive products.
02_M26_UNICO_EU_2314.indd 28
02_M26_UNICO_EU_2314.indd 28
07/04/2023 12:05:44
07/04/2023 12:05:44