152
Enter Setup
1166/1266 Barcode Scanner User Guide
Enter Setup
Download
5) Run the download utility “ProgLoad.exe” on your computer.
Kernel + User Program
User Program Only
1x66BuildVxxx.shx 1x66Vxxx.shx
For the communication settings, select
“RS-232” and the correct COM port.
For RS-232, select 115200 bps for baud
rate.
For the file option, click [Browse] to select
the target file for firmware update.
Click [OK].
6) After upgrading kernel, you will need to manually restart the scanner.
After upgrading the user program, the scanner will automatically restart itself once
the download is completed successfully.
Note: The output interface remains unchanged as specified in step 3 (= RS-232), and
the baud rate setting is still 115200 bps!
To Next Page
Loading...
Need help?
General
