CipherLab 1266 User Manual

58
Enter Setup
1166/1266 Barcode Scanner User Guide
2.4 RS-232 VIA 3666
Use the RS-232 cable to connect the scanner via 3666 to the serial port of PC, and
connect the power supply cord. The associated RS-232 parameters must match those
configured on the computer. You may run HyperTerminal.exe on your computer, and the
scanned data will be transmitted to the computer.
RS-232 Settings
Defaults
Baud Rate, Data Bit, Parity, Stop Bit 9600 bps, 8 bits, No parity
Flow Control None
Inter-Character Delay 0 (ms)
2.4.1 ACTIVATE RS-232 INTERFACE
Activate
3
666
RS-232 Interface
2.4.2 BAUD RATE
115200 bps
38400 bps
19200 bps
*9600 bps
4800 bps
2400 bps

CipherLab 1266 Specifications

General

Brand	CipherLab
Model	1266
Category	Barcode Reader
Language	English