To Next Page

To Previous Page

163

Update

Appendix III

Keyboard Wedge Table

EXAMPLE

KEY TYPE = NORMAL

For example, if you want to program the character “!” as the prefix code:

1. Read the “Configure Prefix” barcode.

2. Read the “Hexadecimal Value” barcode on page 166 for “2” and “1”.

3. Read the “Validate” barcode to complete this setting.

KEY TYPE = SCAN CODE

For example, if you want to program the character “a” (= “1C” on the scan code table) as the

prefix code:

1. Read the “Configure Prefix” barcode.

2. Read the “Scan Code” barcode.

3. Read the “Hexadecimal Value” barcode o on page 166 for “1” and “C”.

4. Read the “Validate” barcode to complete this setting.

KEY TYPE = NORMAL + KEY STATUS = SHIFT

For example, if you want to program the character “!” (= “Shift” + “1” on keyboard) as the prefix

code:

1. Read the “Configure Prefix” barcode.

2. Read the “Add Shift” barcode.

3. Read the “Hexadecimal Value” barcode on page 166 for “3” and “1”.

4. Read the “Validate” barcode to complete this setting.

CipherLab 1266 User Manual

Questions and Answers: