10
Enter Setup
1166/1266 Barcode Scanner User Guide
Working Mode
Upon powering up, the scanner will try to establish a connection with 3666 or a computer with
Bluetooth
®
wireless technology. Refer to Chapter 3 – Setting up a WPAN Connection for details.
The connection between the scanners and 3666 is made easy and reliable.
Note: If RS-232 or BT SPP is selected for output interface, the host can directly send
serial commands to configure the scanner. For example, run HyperTerminal.exe
and type the 4-digit command located under each setup barcode. Refer to
Appendix II Host Serial Commands.
To Next Page
Loading...
