Software Installation Guide 8
Starting the Software
1. Double-click the Easy-Wire software icon to start the software.
2. Make sure you select the appropriate tester type in the User Login window.
Note: If you’ve updated an existing installation, the user name and password will be the same.
3. The main menu will display. If you have updated an existing installation, the software
should allow you to access your previous data.
Updating the Server Configuration
Share the Cirris folder with those who have read/write permissions. Default folder location:
C:\Users\Public\Public Documents\Cirris.
(1100) Easy-Wire PC Control for Benchtop Testers
If you purchased your 1100 tester with Easy-Wire software, your tester will already be enabled to
interface with your PC.
If you purchased your 1100 tester without Easy-Wire and have since purchased the PC Control
feature, follow these steps:
1. Install the Easy-Wire software on a PC.
2. Connect your tester to the PC.
3. Launch Easy-Wire Software. In the Easy-Wire main menu, click Utilities, Setup System
Options, Enable Features.
4. Follow the prompts in the “Features Available on this Tester” window.
a. Contact Cirris and provide the given serial number.
b. Enter the Feature Key that Cirris will have provided to you.
Press Install the Feature.
(CR, CH2) Attaching to a Network Database Server
1. On each station that will be attached to your network, click the Windows Start button.
2. Click on All Programs, Cirris Systems Corporation, [Installed Software], Attach Station to
Network.
3. When the “Convert Stand Alone Station to Network Server” window appears, click Find
Server Location to locate the database configuration file. This file will be located on the
Network Database Server with the following default path:
C:\Users\Public\Documents\Cirris\common\CirrisDataAccessServer.ini.
4. Click Convert.
To Next Page
Loading...
