Cisco 11503 - CSS Content Services Switch - Page 337

A-3
Cisco Content Services Switch Administration Guide
OL-5647-02
Appendix A Upgrading Your CSS Software
Before You Begin
3. Use the ftp-record command to configure the default FTP server. The syntax
is:
ftp-record ftp_record ip_or_host username [“password”
|des-password des_pwd] {base_directory}
The options and variables for this command are:
• ftp_record - Name for this FTP record file. Enter an unquoted text string
with no spaces and a maximum of 32 characters.
• ip_or_host - IP address or host name of the FTP server you want to
access. Enter an IP address in dotted-decimal notation (for example,
192.168.11.1) or a mnemonic host name (for example,
myhost.mydomain.com).
• username - Valid login username on the FTP server. Enter a
case-sensitive unquoted text string with no spaces and a maximum of
16 characters.
• password - Password for the valid login username on the FTP server.
Enter a case-sensitive, quoted text string with no spaces and a maximum
of 16 characters. The CSS allows all special characters in a password
except for the percent sign (%).
• des-password des_pwd - Specifies the Data Encryption Standard (DES)
encrypted password for the valid login username on the FTP server. Enter
a case-sensitive, unquoted text string with no spaces and a maximum of
64 characters.
• base_directory - (Optional) Base directory when using this record.
For example:
(config)# ftp-record DEFAULT_FTP 192.168.2.01 eng1 des-password
serve
You can now upgrade your CSS.