Cisco 11503 - CSS Content Services Switch - Page 349

A-15
Cisco Content Services Switch Administration Guide
OL-5647-02
Appendix A Upgrading Your CSS Software
Upgrading Your CSS Software
For example, to archive the admin-profile file from the scripts directory to the
archive directory, enter:
# archive script admin-profile
To copy any changes to your current user profile to the scripts directory and
then archive the profile to the archive directory, use the save_profile alias
command. For example, enter:
# save_profile
5. Copy the new ADI to the CSS as the boot-image. If you are copying an
uncompressed version of the ADI from the FTP server, include the .adi file
extension (for example, sg0740002.adi).
(config-boot)# <Ctl-z>
# copy ftp DEFAULT_FTP sg0740002.adi.gz boot-image
DEFAULT_FTP is the FTP record file defined in the “Configuring an FTP
Server Record on the CSS” section.
Note When you copy a GZIP-compressed ADI onto the CSS, the CSS
automatically uncompresses it.
6. Unpack the ADI.
(config)# boot
(config-boot)# unpack sg0740002.adi
7. Set the new ADI as the primary boot file and install it. For example:
(config-boot)# primary boot-file sg0730003
8. Reboot the system.
(config)# boot
(config-boot)# reboot
The CSS automatically performs a Flash upgrade, if necessary, and then boots
the new image.