Cisco 2800 Series User Manual

Upgrading the System Image
Additional References
24
OL-5595-01
Router# copy flash: tftp:
IP address of remote host [255.255.255.255]? 192.0.0.1
filename to write on tftp host? c2800-image-mz
writing c2800-image-mz !!!!...
successful ftp write.
Additional References
The following sections provide references related to upgrading the system image on your router.
Related Documents and Websites
Related Topic Document Title or Website
Matching Cisco IOS releases and features to hardware Cisco Feature Navigator at http://www.cisco.com/go/fn
1
1. You must have an account on Cisco.com. If you do not have an account or have forgotten your username or password, click Cancel at the login dialog
box and follow the instructions that appear.
Choosing the Cisco IOS release and feature set How to Choose a Cisco IOS Software Release
Downloading system images
Displaying minimum DRAM and flash memory
requirements
Download Software Area at
http://www.cisco.com/kobayashi/sw-center/index.shtml
1
Choosing and downloading system images Software Center at
http://www.cisco.com/kobayashi/sw-center/index.shtml
Loading and maintaining system images Cisco IOS Configuration Fundamentals and Network Management
Configuration Guide
Using external compact flash memory cards Using Compact Flash Memory Cards
Removing, inserting, and upgrading compact flash
memory cards
hardware installation guide for your router
Connecting your PC to the router console port quick start guide for your router
Upgrading the system image on similar routers Software Installation and Upgrade Procedure
Verifying that the router and the server are on the same
network
Determining IP Addresses: Frequently Asked Questions
Troubleshooting while using TFTP or RCP to copy the
system image into flash memory
Common Problems in Installing Images Using TFTP or an RCP
Server
Using the ROM monitor Using the ROM Monitor
Using console download (xmodem) in the ROM
monitor to copy the system image into flash memory
Xmodem Console Download Procedure Using ROMmon
Upgrading the system image from boot mode How to Upgrade from ROMmon Using the Boot Image

Cisco 2800 Series Specifications

General

Power Supply	Internal power supply
Product Type	Router
Form Factor	Rack-mountable
Connectivity Technology	Wired
Power Device	Internal power supply
Operating System	Cisco IOS
Integrated Services	Security, voice
WAN Interfaces	T1/E1, Serial
LAN Interfaces	Fast Ethernet, Gigabit Ethernet
Expansion Slots	4
Data Link Protocol	Ethernet, Fast Ethernet, Gigabit Ethernet
Network/Transport Protocol	IP, TCP
Remote Management Protocol	SNMP, Telnet
Features	VPN support, Quality of Service (QoS), VLAN support
Voltage Required	AC 100-240 V
Security Features	Firewall, VPN, Access Control Lists (ACLs)