Cisco 2800 Series - Page 99

IP Communication Solution for Group Applications Configuration Example
Verify
23
OL-6574-01
3845-gw# show voice trace 0/2/1:1
0/2/1:1 1 State Transitions: timestamp (state, event) -> (state, event) ...
42.808 (S_SETUP_INDICATED, E_CC_PROCEEDING) ->
42.808 (S_PROCEEDING, E_CC_CONNECT) ->
State Transitions: timestamp (state, event) -> (state, event) ...
42.808 (S_TRUNK_PEND, E_HTSP_EVENT_TIMER) ->
42.808 (S_TRUNK_PROC, E_HTSP_SETUP_ACK) ->
42.808 (S_TRUNK_PROC, E_HTSP_PROCEEDING) ->
42.808 (S_TRUNK_PROC, E_HTSP_VOICE_CUT_THROUGH) ->
42.808 (S_TRUNK_W_CONNECT, E_HTSP_CONNECT) ->
The following is an example of output for the show voice call summary command on the branch office
router:
3845-gw# show voice call summary
PORT CODEC VAD VTSP STATE VPM STATE
============== ======== === ==================== ======================
0/2/0:1.1 - - - EM_ONHOOK
0/2/0:2.2 - - - EM_ONHOOK
0/2/0:3.3 - - - EM_ONHOOK
0/2/0:4.4 - - - EM_ONHOOK
0/2/0:5.5 - - - EM_ONHOOK
0/2/0:6.6 - - - EM_ONHOOK
0/1/0 g711ulaw y S_CONNECT S_TRUNKED
0/1/1 g711ulaw y S_CONNECT S_TRUNKED
0/2/1:1.1 g711ulaw y S_CONNECT S_TRUNKED
0/2/1:2.2 g711ulaw y S_CONNECT S_TRUNKED
0/2/1:3.3 g711ulaw y S_CONNECT S_TRUNKED
0/2/1:4.4 g711ulaw y S_CONNECT S_TRUNKED
0/2/1:5.5 g711ulaw y S_CONNECT S_TRUNKED
0/2/1:6.6 g711ulaw y S_CONNECT S_TRUNKED
0/3/0 - - - FXSLS_ONHOOK
0/3/1 - - - FXSLS_ONHOOK
0/3/2 - - - FXSLS_ONHOOK
0/3/3 - - - FXSLS_ONHOOK
50/0/1 .1 - - - EFXS_ONHOOK
50/0/9 .1 - - - EFXS_ONHOOK
50/0/9 .2 - - - EFXS_ONHOOK
The following is an example of output for the show version command on the CE:
sjc22-13a-rb-CE3# show version
Application and Content Networking System Software (ACNS)
Copyright (c) 1999-2003 by Cisco Systems, Inc.
Application and Content Networking System Software Release 5.1.3 (build b15 Feb
13 2004)
Version: ce2636-sw-5.1.3
Compiled 17:52:07 Feb 13 2004 by test
Compile Time Options: PP SS
System was restarted on Tue Jan 1 00:01:12 1980.
The system has been up for 16 hours, 8 seconds.
The following is an example of output for the show running-config command on the CE:
sjc22-13a-rb-CE3# show running-config
hostname sjc22-13a-rb-CE3
!