Cisco 7911G - IP Phone VoIP User Manual

Chapter 4 Configuring Settings on the Cisco Unified IP Phone
Network Configuration Menu
4-12
Cisco Unified IP Phone 7906G and 7911G for Cisco Unified Communications Manager 6.0
OL11954-01
DHCP Enabled Indicates whether DHCP is being used by the
phone.
1. Unlock network configuration
options.
2. Scroll to the DHCP Enabled
option and press the No
softkey to disable DHCP, or
press the Yes softkey to enable
DHCP.
3. Press the Save softkey.
DHCP Address
Released
Releases the IP address assigned by DHCP.
1. Unlock network configuration
options.
2. Scroll to the DHCP Address
Released option and press the
Ye s softkey to release the IP
address assigned by DHCP, or
press the No softkey if you do
not want to release this IP
address.
3. Press the Save softkey.
Alternate TFTP Indicates whether the phone is using an
alternative TFTP server.
1. Unlock network configuration
options.
2. Scroll to the Alternate TFTP
option and press the Yes
softkey if the phone should use
an alternative TFTP server.
Press the No softkey
otherwise.
3. Press the Save softkey.
Table 4-2 Network Configuration Menu Options (continued)
Option Description To Change

Cisco 7911G - IP Phone VoIP Specifications

General

Brand	Cisco
Model	7911G - IP Phone VoIP
Category	IP Phone
Language	English