Cisco 7911G - IP Phone VoIP

4-45
Cisco Unified IP Phone 7906G and 7911G for Cisco Unified Communications Manager 6.0
OL11954-01
Chapter 4 Configuring Settings on the Cisco Unified IP Phone
Security Configuration Menu
Table 4-21 802.1X Authentication Real-Time Status
Option Description To Change
802.1X
Authentication Status
Real-time progress of the 802.1X
authentication status. Displays one
of the following states:
• Disabled—802.1X is disabled
and transaction was not
attempted
• Disconnected—Physical link
is down or disconnected
• Connecting—Trying to
discover or acquire the
authenticator
• Acquired—Authenticator
acquired, awaiting
authentication to begin
• Authenticating—Authentication
in progress
• Authenticated—Authentication
successful or implicit
authentication due to timeouts
• Held—Authentication failed,
waiting before next attempt
(approximately 60 seconds)
Display only—Cannot configure.