Chapter 5 Configuring Features, Templates, Services, and Users
Telephony Features Available for the Cisco Unified IP Phone
5-4
Cisco Unified IP Phone 7906G and 7911G for Cisco Unified Communications Manager 6.0
OL11954-01
Barge Allows a user to join an in-progress call on
a shared line. Phones support Barge in two
conference modes:
• Built-in conference bridge at the target
device (the phone that is being barged).
This mode uses the Barge softkey.
• Shared conference bridge. This mode
uses the cBarge softkey.
For more information, refer to the:
• Cisco Unified Communications
Manager Administration
Guide, “Cisco Unified IP
Phone Configuration” chapter
• Cisco Unified Communications
Manager System Guide,
“Cisco Unified IP Phones”
chapter
• Cisco Unified Communications
Manager Features and
Services Guide, “Barge and
Privacy” chapter
Block external to
external transfer
Prevents users from transferring an external
call to another external number.
For more information, refer to the
Cisco Unified Communications
Manager Features and Services
Guide, “External Call Transfer
Restrictions” chapter.
Call display
restrictions
Determines the information that will
display for calling or connected lines,
depending on the parties who are involved
in the call.
For more information, refer to the:
• Cisco Unified Communications
Manager Administration
Guide, “Cisco Unified IP
Phone Configuration” chapter
• Cisco Unified Communications
Manager System Guide,
“Understanding Route Plans”
chapter
• Cisco Unified Communications
Manager Features and
Services Guide, “Call Display
Restrictions” chapter
Table 5-1 Telephony Features for the Cisco Unified IP Phone (continued)
Feature Description Configuration Reference
To Next Page
Loading...
