Cisco 7911G - IP Phone VoIP User Manual

Chapter 5 Configuring Features, Templates, Services, and Users
Telephony Features Available for the Cisco Unified IP Phone
5-6
Cisco Unified IP Phone 7906G and 7911G for Cisco Unified Communications Manager 6.0
OL11954-01
Call pickup Allows users to redirect a call that is ringing
on another phone within their pickup group
to their phone.
You can configure an audio and/or visual
alert for the primary line on the phone. This
alert notifies the users that a call is ringing
in their pickup group.
For more information, refer to:
• Cisco Unified
Communications Manager
Administration Guide, “Call
Pickup Group” chapter.
• Cisco Unified
Communications Manager
Features and Services Guide,
“Call Pickup Group” chapter.
Call Recording Allows a supervisor to record an active call.
The user might hear an intermittent tone
(beep tone) during a call when it is being
recorded.
Note The intercom feature is disabled
when a call is being monitored or
recorded.
For more information, refer to the
Cisco Unified Communications
Manager Features and Services
Guide, “Monitoring and Record-
ing” chapter.
Call waiting Receives a second incoming call on the
same line without disconnecting the first
call.
Requires no configuration.
Caller ID Displays the telephone number and name of
the caller.
For more information, refer to the:
• Cisco Unified Communications
Manager Administration
Guide, Configuring
“Cisco Unified IP Phones”
chapter
• Cisco Unified Communications
Manager System Guide,
“Understanding Route Plans”
chapter
• Cisco Unified Communications
Manager Features and
Services Guide, “Call Display
Restrictions” chapter
Table 5-1 Telephony Features for the Cisco Unified IP Phone (continued)
Feature Description Configuration Reference

Cisco 7911G - IP Phone VoIP Specifications

General

Brand	Cisco
Model	7911G - IP Phone VoIP
Category	IP Phone
Language	English