Chapter 5 Configuring Features, Templates, Services, and Users
Telephony Features Available for the Cisco Unified IP Phone
5-22
Cisco Unified IP Phone 7906G and 7911G for Cisco Unified Communications Manager 6.0
OL11954-01
Video mode
(7911G only)
Allows a user to select the video display
mode for viewing a video conference,
depending on the modes configured in the
system.
For more information:
• See the “Configuring Softkey
Templates” section on
page 5-25.
• Cisco Unified
Communications Manager
Administration Guide,
“Conference Bridge
Configuration” chapter.
• Cisco Unified
Communications Manager
System Guide, “Understanding
Video Telephony” chapter.
Video support
(7911G only)
Enable video support on the phone. For more information refer to:
• Cisco Unified
Communications Manager
Administration Guide,
“Conference Bridge
Configuration” chapter.
• Cisco Unified
Communications Manager
System Guide, “Understanding
Video Telephony” chapter.
• Cisco VT Advantage
Administration Guide,
“Overview of Cisco VT
Advantage” chapter.
Table 5-1 Telephony Features for the Cisco Unified IP Phone (continued)
Feature Description Configuration Reference