Chapter 7 Viewing Model Information, Status, and Statistics on the Cisco Unified IP Phone
Status Menu
7-14
Cisco Unified IP Phone 7906G and 7911G for Cisco Unified Communications Manager 6.0
OL11954-01
One of the following
values:
Initialized
TCP-timeout
CM-closed-TCP
TCP-Bad-ACK
CM-reset-TCP
CM-aborted-TCP
CM-NAKed
KeepaliveTO
Failback
Phone-Keypad
Phone-Re-IP
Reset-Reset
Reset-Restart
Phone-Reg-Rej
Load Rejected HC
CM-ICMP-Unreach
Phone-Abort
Cause of the last reset of the phone
Elapsed Time Amount of time that has elapsed since the phone
connected to Cisco Unified Communications
Manager
Port 1 Link state and connection of the Network port
Port 2 (applies to 7911G
only)
Link state and connection of the PC port (for
example,
Auto 100 Mb Full-Duplex means that the
PC port is in a link up state and has auto-negotiated
a full-duplex, 100-Mbps connection)
DHCP BOUND Indicates whether DHCP parameters are associated
with the phone.
Table 7-4 Network Statistics Screen (continued)
Item Description
To Next Page
Loading...
