Cisco 7911G - IP Phone VoIP User Manual

Chapter 8 Monitoring the Cisco Unified IP Phone Remotely
Network Configuration
8-6
Cisco Unified IP Phone 7906G and 7911G for Cisco Unified Communications Manager 6.0
OL11954-01
Network Configuration
The Network Configuration area on a phone’s web page displays network
configuration information and information about other phone settings. Table 8-2
describes these items.
You can view and set many of these items from the Network Configuration Menu
and the Device Configuration Menu on the Cisco Unified IP Phone. For more
information, see Chapter 5, “Configuring Features, Templates, Services, and
Users.”
To display the Network Configuration area, access the web page for the phone as
described in the “Accessing the Web Page for a Phone” section on page 8-2, and
then click the Network Configuration hyperlink.
Time Zone Timezone obtained from the Date/Time Group in
Cisco Unified Communications Manager to which the
phone belongs
Date Date obtained from the Date/Time Group in
Cisco Unified Communications Manager to which the
phone belongs
1. The Version Identifier field might display blank if using an older model Cisco Unified IP Phone
because the hardware does not provide this information.
Table 8-1 Device Information Area Items (continued)
Item Description
Table 8-2 Network Configuration Area Items
Item Description
DHCP Server IP address of the Dynamic Host Configuration
Protocol (DHCP) server from which the phone obtains
its IP address.
BOOTP Server Indicates whether the phone obtains its configuration
from a Bootstrap Protocol (BootP) server.
MAC Address Media Access Control (MAC) address of the phone.

Cisco 7911G - IP Phone VoIP Specifications

General

Brand	Cisco
Model	7911G - IP Phone VoIP
Category	IP Phone
Language	English